Chevrolet Suburban Service & Repair Manuals
2000 Chevrolet Suburban C1500
MODEL IDENTIFICATION
"K" 4WD Pickup, Sierra, Silverado, Suburban, Tahoe, Yukon & AWD
Escalade
"L" AWD Astro & Safari
"T" 4WD Blazer, Envoy, Jimmy, Pickup, Sonoma, & AWD Bravada
Vehicle series is fifth character of VIN.
REMOVAL & INSTALLATION
STEERING KNUCKLE
Removal
1. Raise and support vehicle. Remove wheel and tire assembly. Install Axle Shaft Boot Seal Protector (J-28712)
on axle shaft boot to protect boot during repair. Detach and depress brake caliper piston, and wire aside.
Remove brake rotor.
2. Remove cotter pin and retainer (if equipped) from axle shaft nut. Remove nut and washer from axle shaft.
Remove cotter pin and tie rod end nut. Separate tie rod end from steering knuckle. See Fig. 1 .
3. Attach puller to hub. Tighten pressure screw, and force axle shaft from hub and bearing assembly. Remove
hub and bearing assembly from steering knuckle. Remove splash shield.
Chevrolet Suburban 1991-1999 Service Manual
CHEVROLET Pickups, Suburban (1991-1999), Blazer (1991-1995), Tahoe (1994-1999).
CONTENT
Operation and Maintenance Manual
Car Maintenance
All engines - repair Dismantling and engine overhaul without removing from the car
Cooling, heating and air conditioning systems
Fuel and exhaust systems
Engine electrical equipment
Systems of decrease in toxicity of the fulfilled gases
Manual gearbox
Automatic transmissions
Brake system
System of an electric equipment of a body